从当前国内不锈钢冲压弯头市场运行来看，成交价格已经进入上行通道惯性上涨，就目前的市场环境和运行条件而言，短时间内价格仍具有继续上涨的可能性。与此同时我们也发现，上游的原燃料市场成交价格，有可能被不锈钢冲压弯头产品价格拉起，出现反弹迹象。
   冲压弯头耐空气、蒸汽、水等弱腐蚀介质和酸、碱、盐等化学浸蚀性介质腐蚀的钢。实际应用中，常将耐弱腐蚀介质腐蚀的钢称为不锈钢冲压弯头，而将耐化学介质腐蚀的钢称为耐酸钢。由于两者在化学成分上的差异，前者不耐化学介质腐蚀，而后者则一般均具有不锈性。
    2009年国内不锈钢冲压弯头生产将被迫进入收缩状态，但是，投资的高增长将使得产能进一步扩大，对不锈钢冲压弯头企业而言，2009年是一个痛苦而压抑之年，如果原材料成本能够大幅下降，还可以钢企压力，无非开工率有所下降。
    工业冲压弯头的磨损一直是影响文明生产的一个因素， 随着技术不断发展，材料也，相继出现铸石、铸钢、 合金、离心浇注复合陶瓷等材料。其中管道内衬氧化铝陶瓷以其高、高硬度、耐氧化、性好和的耐高低温强度性能,已成为一种应用广泛材料，占据了世界特种陶瓷市场份额(材料)的80%左右。
　　在，工业企业普遍采用陶瓷做防磨内衬，包括日本京瓷（KYOCERA）,九州工业及德国BMW 等知名企业均采用高铝瓷制作衬板和零部件。
    无缝冲压弯头英文表示为ELBOW. 缩写为E.
　　常见的表示方法如：
　　(1)45E:45度弯头
　　(2)90E(L):90度长半径弯头
　　(3)90E(S):90度短半径弯头
　　(4)90E（L)R：90度长半径异径弯头
　　(5)180E(L):180度长半径弯头
　　(6)180E(S):180度短半径弯头

From the current domestic steel pressing elbow operation of the market point of view, transaction prices have been rising into the upstream channel of inertia, on the current market environment and operating conditions, the short period of time the price still has the possibility to continue to rise.  At the same time we also found upstream of the original contract price of the fuel market, there may be stainless steel stamping prices pulled elbow, rebounded.
 Press elbow resistance of air, steam, water and other corrosive medium and weak acid, alkali, salt and other chemical attack by corrosive medium steel. Practice, often the weak corrosion resistance as stainless steel corrosion medium on quality, and resistance to chemical media will be referred to as acid-resistant steel corrosion of steel. Since both the differences in chemical composition, the former does not necessarily medium chemical corrosion resistance, while the latter generally has a stainless steel sex.
Domestic stainless steel stamping elbow in 2009 will be forced to enter the contraction of production, but the high investment growth will allow further expansion of production capacity, stainless steel stamping elbow enterprises, in 2009 was a very painful and repressed the year, if the cost of raw materials can be significantly decreased, but also ease some pressure on steel prices, is nothing but the operating rate declined.
 Industry Press elbow wear is always a safe and civilized production of a factor, with the continuous development of science and technology, materials are also innovative, one after another cast stone, cast steel, alloy, centrifugal casting composite ceramic materials.Alumina ceramic lined pipe in which its high wear resistance, high hardness, oxidation resistance, good corrosion resistance and high resistance to high temperature strength properties, has become a most widely used wear resistant materials, special ceramics occupy the world market share (resistant materials) about 80%.
Overseas, the industrial enterprises in general to do with wear-resistant ceramic lining wear, including Kyocera (KYOCERA), Kyushu, and the German BMW and other well-known industrial enterprises are making use of high alumina ceramic liner and wear parts.
English press that is seamless elbow ELBOW. Abbreviated as E.
Said common methods such as:
(1) 45E: 45 degree elbow

(2) 90E (L): 90 ° long radius elbow

(3) 90E (S): 90 ° short radius elbow

(4) 90E (L) R: 90 degrees long radius Reducing elbow

(5) 180E (L): 180 ° long radius elbow

(6) 180E (S): 180 ° short radius elbow